Lost your car remote or need to program a new one for your Ungo alarm system? Ungo, manufactured by Directed Electronics, Inc. (DEI) and often associated with Clarion systems, provides reliable vehicle security. Programming your key fob doesn’t have to be complicated. This guide offers step-by-step instructions to program your Ungo car remote, ensuring you regain seamless access and control over your vehicle’s security system.
Understanding how to program your Ungo remote is essential for convenience and security. Whether you’re replacing a lost remote or adding an extra one, this process will help you synchronize your transmitter with your vehicle’s receiver.
Transmitter Programming Instructions for Ungo Alarm Systems (Made by DEI)
Ungo alarm systems are designed to recognize transmitters that are programmed to the receiver. The system’s memory can hold up to 4 different remote codes. To program additional transmitters, follow the learning procedure outlined below.
It’s important to note that the learn routine might be locked if it has been previously programmed using a ProSecurity Programmer. If you encounter a long chirp from the siren when you attempt to program the unit, it indicates that the learn routine is locked. In such cases, you’ll need to use a ProSecurity Programmer to unlock it before proceeding.
The Valet/Program switch, which connects to the blue port, is crucial for programming. Remember the basic programming sequence: Door, Key, Choose, Transmit, and Release.
-
Open a Door: Ensure that a door is open. This step requires the GREEN wire (H 1/8) or the VIOLET wire (H1/6) to be properly connected in your vehicle’s system. This connection signals the system to enter programming mode.
-
Turn the Ignition ON: Insert your key into the ignition and turn it to the ON position. This step is critical as it powers up the vehicle’s electrical system and the alarm system. The heavy gauge pink wire must be connected to provide power.
-
Choose Function within 10 Seconds: Locate the Valet/Program switch. Within 10 seconds of turning the ignition ON, press and release the program switch. The number of presses corresponds to the function you wish to access, as detailed in the function table below.
After selecting the function step by pressing the switch the required number of times, press the switch once more and hold it down. You’ll receive confirmation through an LED flash and a siren chirp, indicating that the system has registered the selected function step. Do not release the Program switch at this point.
Functions Explained
| Function | Description | Notes |
|---|---|---|
| 1 | Auto Learn Standard Configuration (Default): Automatically sets up the remote button configuration. | NOTE: You cannot customize the configuration of the remote control buttons when using this function. |
| 2 | Delete Remotes: Erases all remotes from the system’s memory. | NOTE: This function is useful if a remote is lost or stolen, preventing unauthorized access. It does not reset system programming features or the Intelli-Tach Setting. |
| 3 | Reset Feature: Resets all system features back to their factory default settings. | NOTE: This does not delete programmed remotes from the system’s memory and does not reset the Intelli-Tach setting. |
| 4 | Intelli-Tach Reset: Deletes all learned values for Intelli-Tach. The unit will re-initialize Intelli-Tach on the next remote start. | NOTE: Intelli-Tach is a feature related to remote start functionality, likely for tachometer learning. The “Zap” feature on the ProSecurity Programmer does not reset the Intelli-Tach setting. |
Ungo RPN 477U EZSDEI477T Key Fob Remote for Clarion and DEI Alarm Systems
4a. Transmit: While continuing to hold the Valet/Program switch, press the lock button on your Ungo remote control. A chirp from the system confirms successful code programming or feature reset. Keep in mind that each remote control button can only be programmed to the system once.
- Release: Once the code learning or feature reset process is complete, you can release the Valet/Program switch.
To move between programming steps, release the Valet/Program switch briefly, then tap it to advance to the next step, and hold it again to select the new function.
Troubleshooting and Professional Help
If you encounter difficulties programming your remote or prefer professional assistance, consider finding a qualified installer. You can search for a professional key fob installer in your area by entering your city or zip code in online search engines. Professionals have the expertise and tools to program your remote efficiently and address any complex issues that may arise.
By following these instructions, you should be able to program your Ungo car remote and maintain the security and convenience of your vehicle’s alarm system.
