Experiencing trouble getting your Audiovox car alarm remote to chirp? You’re not alone. Many users encounter situations where their remote functions perfectly for locking and unlocking doors, yet the audible chirp, a common confirmation signal and feature for functions like car finding, remains silent. This guide dives into troubleshooting steps to get your Audiovox remote chirping again, focusing on common causes and solutions.
If you’ve recently installed a new Audiovox car alarm remote, such as a CodeAlarm CA 5051, or noticed the chirp suddenly stopped working on your existing system, there are a few key areas to investigate before assuming a major malfunction. Often, the issue stems from a simple setting or connection problem rather than a complex programming need.
First, let’s address the possibility of a disabled chirp feature. Many Audiovox systems, including CodeAlarm models, offer a “silent mode” or the ability to toggle the chirp sound on or off. Refer to your Audiovox car alarm system’s manual for the specific procedure to check and toggle this setting. A common method involves turning the ignition key to the ‘on’ position, then ‘off’, followed by pressing the valet button a specific number of times, often three. The system should respond with chirps indicating whether the audible confirmation is now enabled or disabled.
If toggling the silent mode doesn’t restore the chirp, the next step is to consider the horn connection itself. Audiovox car alarms typically use a dedicated output wire to signal the vehicle’s horn for chirps and panic alarms. While professionally installed systems should have robust wiring, it’s worth a visual inspection if you’re comfortable doing so. Locate the alarm system’s control module, often found under the dashboard. Look for the wiring harness and identify the horn output wire, as indicated in your installation manual (typically a brown or brown/black wire). Ensure this wire is securely connected and shows no signs of damage or disconnection.
It’s also important to consider the possibility of a fuse related to the horn circuit. While some wiring diagrams might not explicitly show a fuse directly in the alarm system’s horn output, the vehicle’s horn circuit itself will have a fuse in the car’s fuse box. Check your vehicle’s owner’s manual to locate the horn fuse and inspect it to ensure it’s not blown. A blown fuse could prevent the horn from sounding, regardless of the alarm system’s signals.
While the primary keyword is “How To Program Audiovox Car Alarm Remote,” in this context, the issue isn’t necessarily about programming the remote itself, but troubleshooting a specific function – the chirp. If basic troubleshooting steps don’t resolve the silent chirp issue, and you suspect a more complex problem with the alarm system’s horn output or internal settings, consulting a professional car alarm installer is advisable. They possess the expertise and tools to diagnose the system thoroughly and perform any necessary repairs or reprogramming to restore the audible chirp functionality to your Audiovox car alarm remote.
