Programming a spare remote key for your Peugeot, particularly models like the 2008 308, can present unexpected challenges. It’s not always as straightforward as it seems, and understanding potential pitfalls can save you time and frustration. Here’s what you need to know when attempting to program a new key for your Peugeot.
One common misconception is that obtaining your Vehicle Identification Number (VIN) will easily lead to your Personal Identification Number (PIN) or key cutting number. However, this method isn’t always reliable. If your Peugeot has a history of changes, such as alterations to the PIN or key cutting number, the VIN-to-PIN approach may not work. In fact, both the PIN and key cutting number on some vehicles may have been changed at some point in their history, rendering the VIN method ineffective.
In cases where the VIN-to-PIN method fails, the only reliable way to retrieve the correct PIN is to have it read directly from your car. This requires specialized equipment that can interface with your vehicle’s system and extract the necessary security code. Interestingly, there are multiple types of diagnostic kits that can perform this function, but it’s uncertain which one will successfully communicate with your specific car until it’s connected.
Another critical factor to consider, especially for Peugeot owners, is a significant supplier change that occurred on September 2, 2016. Peugeot transitioned from using Eurocir remotes to Delphi remotes. Delphi remotes are identifiable by their battery being housed on the circuit board. A crucial point is that the remote open/close buttons on a Delphi remote will not function with your car unless your vehicle originally came with a Delphi remote, or you have had your car’s Body Systems Interface (BSI) settings updated at a Peugeot dealership. This BSI update is necessary to ensure compatibility with the newer Delphi remote system.
For owners of older Peugeots that originally came with Eurocir remotes, replacing a lost or damaged remote can be problematic. Peugeot no longer manufactures Eurocir remotes. Therefore, if you need a replacement Eurocir remote, your only option is often to purchase a Chinese clone.
Finally, a frequently asked question when adding a new remote is whether the old remote will still function. While this can vary, in many cases, adding a new remote does not disable the functionality of your existing remote keys. It’s always advisable to test all your remotes after programming a new one to confirm they are all working as expected. Getting the PIN read directly from your car is a crucial step, and understanding the Eurocir/Delphi remote distinction is vital for Peugeot key programming, particularly for models around 2008.
