Have you recently purchased a new key fob remote for your 2014 Honda CRV, or perhaps the battery in your existing remote has died? No need to worry about expensive dealership programming! Programming your keyless remote for your 2014 Honda CRV is a straightforward process you can easily accomplish at home. This step-by-step guide will walk you through programming your 2014 Honda CRV key to start your car quickly and efficiently.
Step-by-Step Guide to Program Your 2014 Honda CRV Key Fob
Follow these simple steps to program your Honda CRV key remote and regain keyless entry and start functionality. Remember to perform these steps relatively quickly, as timing is important for successful programming.
Step 1: Gather Your Remotes.
Before you begin, ensure you have all the remotes you intend to use with your 2014 Honda CRV. While you only need one working remote to initiate programming mode, it’s crucial to program all remotes in a single session. The system will erase any previously programmed remotes not included in the current programming sequence.
Step 2: Prepare Your Vehicle.
Get inside your 2014 Honda CRV and make sure all doors are completely closed and unlocked. This is essential for the programming sequence to initiate correctly.
Step 3: Turn the Ignition to the “ON” Position.
Insert your key into the ignition and turn it to the “ON” position. This is the position just before you would start the engine. You should see the accessory lights illuminate on your dashboard.
Step 4: Press the “LOCK” Button (First Cycle).
Within five seconds of turning the key to the “ON” position, press the “LOCK” button on your remote control transmitter for approximately one second.
Step 5: Turn the Ignition to the “OFF” Position.
Immediately after pressing the “LOCK” button, turn the ignition key back to the “OFF” position.
Step 6: Repeat the ON/OFF Cycles.
Repeat Steps 4 and 5 two more times. This means you will have a total of three “ON/OFF” cycles, each initiated within five seconds of the previous step. It’s crucial to maintain this timing for the programming to work.
Step 7: Enter Programming Mode.
Turn the key to the “ON” position for the fourth time. Then, press the “LOCK” button on your remote once more. If you’ve followed the steps correctly, you should hear a “clunk” noise from your Honda CRV’s door locks. This sound indicates that your vehicle has successfully entered Remote Programming Mode. Do not turn the key off at this point.
Step 8: Program Additional Remotes (Optional).
If you have additional remotes to program for your 2014 Honda CRV, now is the time. Within 10 seconds of entering programming mode, press the “LOCK” button on each additional remote for one second each. You will hear the “clunk” sound after programming each remote, confirming it has been successfully stored in the system’s memory. Note that a maximum of three remotes can be programmed to your Honda CRV.
Step 9: Exit Programming Mode and Test.
Finally, turn the ignition key to the “OFF” position and remove the key from the ignition. Now, test each of your programmed remotes to ensure they are working correctly. Try locking and unlocking your doors and, if applicable, starting your 2014 Honda CRV using the remote start feature (if equipped).
Important Reminders for Programming Your Honda CRV Key
- Timing is Key: Ensure you complete each step within the specified five-second window to successfully program your 2014 Honda CRV key.
- All Remotes in One Session: Program all desired remotes during a single programming session to avoid losing functionality of previously programmed remotes.
- Remote Inoperable with Key in Ignition: Remember that your key fob remote will not function when the key is in the ignition. This is a normal operating characteristic.
- Security Consideration: If you have lost a keyless entry remote, reprogramming your Honda CRV remotes is a wise security measure to prevent unauthorized vehicle access.
By following these instructions, you can easily program your 2014 Honda CRV key to start your car and enjoy the convenience of keyless entry without a trip to the dealership.
